Version 1 (modified by Victor Julien, 13 years ago) ( diff )


Traffic Shaping

Initial setup

First, make sure that Vuurmuur knows the location of the 'tc' binary. To do this in vuurmuur_conf go to 'Vuurmuur Config -> General' and set the 'Tc location'.

Next, set the bandwidth of the interfaces you want to use shaping on. Currently (0.5.74 alpha 1) you can only use shaping with real (non-virtual) interfaces. Go to a interface and press F6. There the bandwidth of the interface can be entered in 'kbit' or 'mbit'.

Note: See TracWiki for help on using the wiki.