|Version 9 (modified by 3 years ago) ( diff ),|
- Plugin discovery
- Installing a Trac plugin
- Setting up the plugin cache
- Web-based plugin administration
From the user's point of view, a plugin is either a standalone .py file or a package (egg or wheel). Trac looks for plugins in Python's
site-packages directory, the global shared
plugins directory and the project environment
plugins directory. Components defined in globally-installed plugins must be explicitly enabled in the [components] section of the
trac.ini file. Components defined in the
plugins directory of the project environment are enabled, unless explicitly disabled in the
[components] section of the
Installing a Trac plugin
The instructions below are applicable to a plugin packaged as an egg. Plugins implemented as a single
py file should be downloaded and copied to the project environment
plugins directory or the global shared plugins directory.
For a single project
If you have downloaded a source distribution of a plugin, and want to build the
- Unpack the source. It should provide
$ python setup.py bdist_egg
You should now have an *.egg file. Examine the output of running Python to find where this was created.
Once you have the plugin archive, copy it into the
plugins directory of the project environment. Also, make sure that the web server has sufficient permissions to read the plugin egg. Then restart the web server. If you are running as a "tracd" standalone server, restart tracd, ie kill the process and run again.
To uninstall a plugin installed this way, remove the egg from the
plugins directory and restart the web server.
Note: the Python version that the egg is built with must match the Python version with which Trac is run. For example, if you are running Trac under Python 2.6, but have upgraded your standalone Python to 2.7, the eggs won't be recognized.
Note: in a multi-project setup, a pool of Python interpreter instances will be dynamically allocated to projects based on need; since plugins occupy a place in Python's module system, the first version of any given plugin to be loaded will be used for all projects. In other words, you cannot use different versions of a single plugin in two projects of a multi-project setup. It may be safer to install plugins for all projects (see below), and then enable them selectively on a project-by-project basis.
For all projects
With an .egg file
Some plugins, such as TracTags, are downloadable as an
.egg file that can be installed with
$ easy_install TracTags
$ pip install TracTags
easy_install is not on your system, see the Trac setuptools documentation.
pip is included in Python 2.7.9. In earlier versions of Python it can be installed through the package manager of your OS (e.g.
apt-get install python-pip) or using the get_pip.py.
If Trac reports permission errors after installing a zipped egg, and you would rather not bother providing an egg cache directory writable by the web server, you can get around it by simply unzipping the egg. Just pass
$ easy_install --always-unzip TracTags
You should end up with a directory having the same name as the zipped egg, complete with
.egg extension, and containing its uncompressed contents.
Trac also searches for plugins installed in the shared plugins directory, see TracIni#GlobalConfiguration. This is a convenient way to share the installation of plugins across several, but not all, environments.
pip make installing from source a snap. Just give it the URL to either a repository or a tarball/zip of the source:
$ easy_install https://trac-hacks.org/svn/tagsplugin/trunk
$ pip install svn+https://trac-hacks.org/svn/tagsplugin/trunk
When installing from a repository using
pip, be sure to use the repository type in the protocol. For example,
svn+https for Subversion and
git+https for Git.
Enabling the plugin
Unlike plugins installed per environment, you'll have to explicitly enable globally installed plugins via trac.ini. This also applies to plugins installed in the shared plugins directory, ie the path specified in the [inherit] plugins_dir configuration option.
This is done in the [components] section of the configuration file
trac.ini. For example:
[components] tractags.* = enabled
The name of the option is the Python package of the plugin. This should be specified in the documentation of the plugin, but can also be easily discovered by looking at the source: look for a top-level directory that contains a file named
After installing the plugin, you must restart your web server.
Upgrading the environment
Some plugins may require an environment upgrade. This will typically be necessary for plugins that implement
IEnvironmentSetupParticipant. Common reasons for requiring an environment upgrade are to add tables to the database or add configuration parameters to trac.ini. A notification will be displayed when accessing Trac for the first time after installing a plugin and restarting the web server. To upgrade the environment, run the command:
$ trac-admin /path/to/env upgrade
A database backup will be made before upgrading the environment, unless the
--no-backup option is specified. For more information, refer to the documentation output by
trac-admin /path/to/env help upgrade.
Redeploying static resources
deploy command, as was done during install and upgrade:
$ trac-admin /path/to/env deploy /deploy/path
After executing the command, you must restart your web server.
Upgrading a Plugin
Normally, upgrading a plugin is simply a matter of repeating the install process. You may want to uninstall old versions of the plugin.
pip install command has an
--upgrade (-U) switch that will uninstall the old version and install the new version. The command can have some unintended side-effects though, because it will also upgrade the plugin dependencies. For example, if
Trac is listed as a dependency of the plugin in
setup.py, the latest version of Trac will be downloaded and installed. This may not be what you want if you are running an older version of Trac because not all your plugins are compatible with the latest version of Trac, or you simply haven't done the appropriate planning for upgrading Trac. Uninstalling and then installing the plugin can be a safer option:
$ pip uninstall <pluginname> $ pip install <pluginname>
Alternatively you can use a requirements file and pin the versions of the packages that you don't want to implicitly upgrade.
pip makes it easy to uninstall a plugin:
$ pip uninstall <pluginname>
pip uninstall command can be used even if the plugin was installed using
python setup.py install.
python setup.py have an uninstall feature. However, it is usually trivial to remove a globally installed egg and reference:
easy_install -m <plugin name>to remove references from
$PYTHONLIB/site-packages/easy-install.pthwhen the plugin is installed by setuptools.
- Delete executables from
C:\\Python*\Scripts. To find what executables are involved, refer to the
- Delete the .egg file or folder from where it's installed, usually inside
- Restart the web server.
If you are uncertain about the location of the egg file, you can try to locate it by replacing
myplugin with whatever namespace the plugin uses (as used when enabling the plugin):
>>> import myplugin >>> print myplugin.__file__ /opt/local/python24/lib/site-packages/myplugin-0.4.2-py2.4.egg/myplugin/__init__.pyc
Setting up the plugin cache
Some plugins will need to be extracted by the Python egg's runtime. See TracInstall for information on setting up the egg cache.
Web-based plugin administration
The WebAdmin interface offers limited support for plugin configuration to users with
- enabling and disabling installed plugins
- installing plugins by uploading them as eggs
If you wish to disable the second function for security reasons, add the following to your
[components] trac.admin.web_ui.PluginAdminPanel = disabled
This disables the whole panel, so the first function will no longer be available either.
Is setuptools properly installed?
Try this from the command line:
$ python -c "import pkg_resources"
If you get no output, setuptools is installed. Otherwise, you'll need to install it before plugins will work in Trac.
Did you get the correct version of the Python egg?
Python eggs have the Python version encoded in their filename. For example,
MyPlugin-1.0-py2.5.egg is an egg for Python 2.5, and will not be loaded if you're running a different Python version (such as 2.4 or 2.6).
Also, verify that the egg file you downloaded is indeed a .zip archive. If you downloaded it from a Trac site, chances are you downloaded the HTML preview page instead.
Is the plugin enabled?
If you install a plugin globally, ie not inside the
plugins directory of the Trac project environment, you must explicitly enable it in trac.ini. Make sure that:
- you actually added the necessary line(s) to the
- the package/module names are correct and do not contain typos.
- the value is "enabled", not "enable" or "Enable".
- the section name is "components", not "component".
Check the permissions on the .egg file
Trac must be able to read the .egg file.
Check the log files
Enable logging and set the log level to
DEBUG, then watch the log file for messages about loading plugins.
Verify you have the proper permissions
Some plugins require you have special permissions in order to use them. WebAdmin, for example, requires the user to have
TRAC_ADMIN permissions for it to show up on the navigation bar.
Is the wrong version of the plugin loading?
If you put your plugins inside the
plugins directories, and certainly if you have more than one project, you need to make sure that the correct version of the plugin is loading. Here are some basic rules:
- Only one version of the plugin can be loaded for each running Trac server, ie each Python process. The Python namespaces and module list will be shared, and it cannot handle duplicates. Whether a plugin is
disabledmakes no difference.
- A globally installed plugin (typically
setup.py install) will override any version in the global or project plugins directories. A plugin from the global plugins directory will be located before any project plugins directory.
- If your Trac server hosts more than one project (as with
TRAC_ENV_PARENT_DIRsetups), having two versions of a plugin in two different projects will give unpredicatable results. Only one of them will load, and the one loaded will be shared by both projects. Trac will load the first plugin found, usually from the project that receives the first request.
- Having more than one version listed inside Python site-packages is fine, ie installed with
setup.py install, because setuptools will make sure you get the version installed most recently. However, don't store more than one version inside a global or project plugins directory: neither the version number nor the installed date will matter at all. There is no way to determine which one will be located first when Trac searches the directory for plugins.
If all of the above failed
Okay, so the logs don't mention plugins, the egg is readable, the Python version is correct, and the egg has been installed globally (and is enabled in trac.ini)... and it still doesn't work or give any error messages or any other indication as to why. Hop on the IrcChannel or MailingList and ask away!